10 main reasons for judicial and disciplinary convictions of engineers, which cause complaints from the supervising engineer of the building, designer and executive*:
*1) Removal of parking:*
Failure to observe the distance between the columns at the entrance of the parking lot and not paying attention to the placement of cars during the construction of walls can result in deducting the space and as a result, removing the parking lot and paying serious offenses under the Article 100 Commission, which in many cases, the owner will be charged by the supervising engineer and construction manager for not Paying attention to this issue and not issuing a report and agenda in this regard, they complain.
*2) Non-observance of the cut seam:*
Non-observance of the cut seam in concrete buildings before concreting the foundation and implementing the roots of the columns and in metal buildings simultaneously with the installation of the base plate and the installation of the building skeleton, which must be controlled by the surveyor supervisor, architect supervisor and coordinating supervisor. In case of not complying with this issue, the owner can get into trouble with a text of complaint against the design engineer.
*3) Non-observance of the load and floor of the building:*
Failure to comply with the weight of the building can cause the property to enter the passageway and failure to comply with the floor level may increase the height of the building or increase the length of the columns, and finally the case will be raised in the material commission and lead to destruction or payment of serious crimes.
This violation can cause the building to enter the road, which will result in a demolition order by filing this case in the commission.
*4) Failure to install standard elevators:*
The fall of the elevator during operation before the final work is issued is another reason to complain to the supervising engineer of the building.
*5) Non-implementation of the scope in the facade of the building:*
The fall of facade can be considered as the most frequent construction accident. which can include irreparable loss of life or heavy financial loss for the owner and supervisor of the building. This issue will cause the owner to sue the builder for the facade of the building and stone fall.
What is a rock scoop? Types of stone scope methods
*6) Non-implementation of the life guard key*
*7) Non-implementation of the air exchange valve:*
Silent death is another incident that, if not implemented, can cause a complaint and condemnation of the supervising and executing engineers of the building after the operation of the building.
*8) Improper execution of the concrete frame* of the building, which will lead to the implementation of the strengthening plan:
Structure supervising engineers and construction executives, in case of not paying attention to executive details and not controlling the concrete sections before concreting and not issuing work agendas and timely reports, in case of construction accidents such as settlement of the structure, as one of the culprits of the settlement of the building in the present court They will be.
Metal jacket
Reinforcement of concrete members using metal jacket
rebar planting
rebar planting
*9) Non-observance of safety measures:*
Working at heights without observing safety measures, not blocking roof openings, falling materials, not properly installing a lift, etc. They are also among the safety issues that unfortunately have involved many engineers and caused complaints from the supervising engineer of the building.
*10) Failure to comply with the classification of construction violations and issuing a thesis before correcting the violations of rows 3 and 4:*
Some of the violations that are included in the category of duties of the supervising engineer of the building, in case of issuing a thesis, can involve legal difficulties for the supervising and executive engineers.
* It is not possible to declare with certainty what accidents may occur in the building, and therefore I only recommend that you do not easily pass by the technical and safety issues in the workshop, because many times these unnecessary omissions can cause bitter accidents and become harmful.*
http://t.me/tceoeng
This post is written by HoseinAhmadi52