Hello and may God give you strength
Educational package of Excode software
(scanning and drawing) (introductory and advanced)
including 50 parts of the video in plain language, a laboratory with a group of telegram troubleshooting
1- Basic explanations about Exocode software and project definition
2- Scan of chipped teeth
3- Scan the post template
4_ Cast scan of full and laminated teeth
5_ Scanning of prepared abutment and gingiva on the cast for veneer design
6- Scan the die on the multi-die to design the frame
7- Scan, body scan and gingiva of both upper and lower jaws, for abutment design and other implant works
8_ scan of tooth base cast for bridge design
9_ To set the meeting of cassettes for easier design
10_ How to send and use the scanned file without the need to define the project
11_ Designing offset coping (frame) after multi-day scanning
12_ Offset coping design (frame) 4 single unit on cast
13_ Design of a bridge (frame) of chiseled teeth with offset coping (Klar)
14_ Inlay and onlay design (trim on the cusp)
15_ Abutment bridge design _buildup_facing_full anatomic
16_ Full anatomical design of the abutment base while maintaining the position and beauty of the cover
17_ Full anatomical bridge design (with pontic) and how to load pre-scanned work
18_ Venice design (laminate) and how to use pre-up and its application
19_ Facing design (buccal cut back)
20_ Designing 1 cover unit based on 2 teeth
21_ Designing 2 veneer units based on 1 tooth
22_ Post design
23_Post cover design at the same time as post design
24_ two-piece post design
25_ How to access the design options to modify the work after completing the design
26_ Maryland anterior tooth bridge design and how to copy and align teeth
27_ Design of Maryland posterior tooth bridge
28_ Bridge cover design with screw channel position for abutment with KV (2 piece bridge)
29_Designing to parallelize the abutment with undercut compared to other abutments with telescoping crown
30_ Crown telescoping design with rest position
31_ How to add pre-up to the software to modify the design of the patient’s mouth
32_ Simultaneous design of abutment (with anti-rotation) and cover
33- How to parallelize the customized abutment with prepared prefabricated abutments
34_ Screw-retin design (screwing)
35_ simultaneous design of Toronto bridge and veneer (gum design)
36_ Full mouse facing and full anatomical screw-retin design
37_ Mockup design
38_ How to design the model after finishing the mockup design for print
39_ How to scan the target person
Model design and print
40_ Guide design to increase the length of the tooth crown
41_ Cast design (model) and Articulator and how to get the output of HTML design files to send to the customer to check the design work and correct it
42_ How to open the HTML file
43_ Bite splint design and its uses
44_ Snap-on smile design
45_ Smile design with the use of pre-up
46_ Load design with multi-body scanning
47_ Designing the load surface frame by adding the pre-up
48_ design of load surface with wax
49_ Upper and lower jaw denture design
50_ Plot design
http://www.instagram.com/digital_dandan_alizade
This post is written by MaryamAlizade7631