Important points #topic_17
Topic 17 with the title of natural gas piping, which has two general sections; Natural gas piping with a pressure of a quarter pound per square inch and the second part of natural gas piping for major consumers with a pressure of 2 to 60 pounds per square inch, 16 chapters and 5 attachments. In the past, between 2 and 3 questions have been asked about this topic.
Part I – Natural gas piping with a pressure of one quarter pound per square inch
Chapter 1: General
Scope of application – Responsibilities
Clause 17-1-2-3, part C, changes in executive plans
Paragraph 17-1-2-5 of the authorized installation section (September 1995)
Chapter 2: Building grouping
Clause 17-2-2-1 residential complexes (Azer 1992 / Shahrivar 1995)
Paragraph 17-2-3 of public buildings
17-2-4 Special buildings (Azer 92)
Clause 17-2-5 types of public buildings
Chapter 3: Special regulations for gas supply to public and special buildings
Paragraph 17-3-1 Designer’s duty
Clause 17-3-2 Prohibition of installing gas-burning heating devices (Aban 93)
Clause 17-3-4-2 (Azar 92)
Clause 17-3-5
Clause 17-3-6
Chapter 4: Design of gas piping system and selection of materials
Clause 17-4-1 (Azar 1992 / Shahrivar 1991)
Page 28 and 29
Paragraph 17-4-2-3, part C-H-X-D
Clause 17-4-2-4, Part C
Table 17-4-1 and Table 17-4-4
Paragraph 17-4-4-1, Part C (Aban 93)
Chapter 5: Implementation of the natural gas piping system
Clause 17-5-1-2 Chamber of accumulation of internal particles of the pipe
Clause 17-5-1-4 Pipe bending (February 1994)
Page 43 and 44 (May 1997)
Table page 45 (March 95)
Page 46, 47 and 48 (June 1993/ October 1996/ September 1995)
Welding page 49 until the end of the season (May 1997/ October 1996/ Aban 1993)
Chapter 6: Quality control, testing, inspection, certification, delivery and gas injection in the piping system
Clause 17-6-1-2, Part T (September 1995)
Chapter 7: Installation and operation of gas appliances:
Clause 17-7-2-3 (March 1995)
Clause 17-7-3-1 (March 1995)
Clause 17-7-3-3 (March 2015)
Table 17-7-1 (February 1994)
Page 63 to 68
Table 17-7-2 (September 1995)
Chapter 8: Chimneys of gas-burning devices in buildings
Page 73 (Aban 93)
Paragraph 8-17-3-8 (May 1997)
Page 78 to 81 (October 1996/ May 1997/ June 1993)
Chapter 9: Operation and maintenance rules of the gas piping system inside the buildings
Page 84
The second part: Natural gas piping with a pressure of 2 to 60 pounds
Chapter 1⃣1⃣: Specification of materials and consumables, estimation, design and selection of gas piping system materials
Paragraph 17-11-1-1 (Aban 93)
Clause 17-11-2-8 Allowable pressure drop (Seal 96)
Chapter 1⃣2⃣: Implementation of gas piping
Clause 12-17-1 (October 1996)
Clause 17-12-5-3 (June 1993)
Page 110 to 114 (May 1997/August 1994)
Chapter 1⃣3⃣: Insulation of pipes
Paragraph 17-13-3 (August 1994)
Paragraph 17-13-4-2 (February 1994)
Clause 17-13-5-7 Pore detection device (August 2014)
Chapter 1⃣4⃣: Welding
Page 125 to 138 (August 1994)
Chapter 16: Quality control, testing, inspection, certification, delivery and gas injection in the piping system.
Clause 9-16-17 (Azerbaijan 92)
Paragraph P-1-4 (June 1993)
Table P-4-10 (June 1994/February 1994)
Introduce our educational channel to your friends
https://t.me/azmunmoqarraratmelisakhteman
This post is written by Mohammadsaadatmand23