body tattoo steps
1- First, the part of the body to be tattooed must be completely shaved
2- Copy the desired design on special carbon paper
3- After copying, to transfer the design to the body, we apply special materials (stencil, gel wax, Dettol) to the desired part, and then stick the design to the body.
4- With gentle pressure and carefully on the whole surface, we transfer the design completely to the body
5- Until the design dries, we prepare the device and select the desired needles
6- Each design is divided into four parts: small, medium, medium to large and large
7- We use the RL needle to draw the main lines of the design
RL needle is used for different size designs according to the numbers, for example RL3 for small design, medium RL5 and RL7, 9 and 11 for larger designs.
8- To fill and shade the design, special needles RS or F are used, which are used for different designs according to their numbers.
Of course, it should be noted that it is better to use F needle for shading
General tattoo rules:
1-Choosing the design 2-Choosing the right needle 3-Copying the design and copying it on the stencil paper
4- Copying the design from the template paper to the body
5- Draw the design lines (lines) from the bottom to the top according to the main design with RL needles
6- Completing the main lines with RS needles if needed
7- The depth of the needle for the working line should be 2 mm
8- For filling, the needle size should be 0.5 or less
9- Use ointment or Vaseline while working
10- In the color designs, dark colors should be tattooed first, followed by the lightest color, i.e. white, at the end. It is necessary to clean the white color regularly. Otherwise, the white color will turn into pink.
stenciling:
Put carbon paper and tracing paper and put the main lines on the stencil. Color the print so that the shadow and lines are clear. The customer should be standing during the stencil work. And before that, we use wax or detul. Don’t forget Shiv.
Care after body tattoo:
The body should not be in contact with water. Don’t stretch your hair. Oil your skin 2-3 times a day. Don’t stay under water.
There are both body and rotary devices
Differences in body systems:
Heavy magnetic gun, loud and powerful at the same time
And it is mostly used to draw the line of Ezgan
Light and quiet rotary vegan, which is mostly used for shading and filling
He used a magnetic or rotary gun for the shade
Of course, despite the lightness of the rotary gun, women can use the rotary in all stages of tattooing
The gun works by means of a connecting cable to the trans and by means of a pedal.
Their body colors are blue and we are not allowed to use them on the face because they contain high lead.
Body tattooing is one of the risky activities, if the care after it is not done properly, the tattooed part may get severe infections. Its risk is also higher than face tattooing.
The designs of the body are also tribal and 3D.
This post is written by phibrows_samira_sajadi