Valid standards used in ground connection systems with download links:
Ground connection of industrial and commercial power systems
IEEE 142
https://www.taraznir.com/standard/ieee142
Ground connection of sensitive electronic equipment
IEEE 1100
https://www.taraznir.com/standard/ieee1100
Ground connection of AC substations
IEEE 80
https://www.taraznir.com/standard/ieee80
Executive and practical instructions for protective earthing of electrical installations (design, material selection, implementation, measurement)
BS 7430
https://www.taraznir.com/standard/bs-7430
National Electrical Code-NFPA 70
https://www.taraznir.com/standard/nfpa-70
Practical advice on static electricity
NFPA 77
https://www.taraznir.com/standard/nfpa-77
Standard of electrical installations in residential buildings
DIN 18015-1
https://www.taraznir.com/standard/din-18015-1
Foundation ground electrode
DIN 18014
https://www.taraznir.com/standard/din-18014
This European standard specifies the minimum requirements for networks and earth connections (bonds) in buildings where information technology equipment is installed, and to protect that equipment and cables connected to each other against electrical hazards, protective networks and bonds are used. .
DIN EN 50310 (VDE 0800-2-310)
https://www.taraznir.com/standard/din-en-50310-(vde-0800-2-310)
This part of IEC 60364 deals with the arrangement of earthing connections, protective conductors and protective earthing conductors to ensure the safety of electrical installations.
DIN IEC 60364-5-54 (VDE 0100-540)
https://www.taraznir.com/standard/din-iec-60364-5-54-(vde-0100-540)
This post is written by hoseino1990