A practical point may be a question for you

Practical tip

You may also be wondering why some toilets and bathrooms always smell unpleasant and despite having a siphon and a vent, this problem becomes annoying.

The key to this issue lies in the way of underlaying, the slope of the floor cement work and finally the leveling.
The water that passes through the pavement and ceramics over time eventually accumulates on the tar sack and if it is not directed to the outlet of the sewer pipe due to the wrong slope or if the water passage is blocked due to the watertightness of the toilet bowl and the inner surface of the sewer pipe. May the water be trapped on the surface of the stone, and over time it will rot and smell.
Usually, the lack of proper water drainage on the cistern causes the toilet to leak first on the outer wall of the toilet and then seeps into the lower floor and causes many problems.

It is recommended to use grooved shoes or, if there is no access, create several grooves on the tubular body of the floor cleaner or four grooves on the outer body of the toilet bowl. Where the plastic shoe goes into the sewer pipe, it should be cut and grooved so that the water drains from its side.
The slope of the floor should be completely towards the shoes and the outlet of the toilet bowl.

This post is written by officialexpertsalimi