After the porcelain tile, you must first apply plaster under the walls. Behind the plastering band, you will bring Rabbitscar to cover the roof of the unit with Rabbits. Of course, if you have a false ceiling, this team must come. It can be done, and then you should have done Izogam flooring and roofing. Now that Izogam has been implemented, if you have laid the electric pipes before, that is not a problem. The electricity of the roof of each floor is done from the floor of the next floor, and this means that for the electricity of the last floor, the pipes had to be pulled from the roof. Do it and at the same time bring the plumber of the sewage and heating facilities with the team of electricians to start implementing the sewage facilities of your toilets, then the electrical work will be plastered, and he will replace the sockets and switches with the groove on the wall and do the carvings. and the sewage installation also does the sewage piping and then goes to the implementation of the water supply system and then the implementation of the heating system of the radiators. After completing your work, you should install your door frame until the level of the highest point, which is determined based on the highest pipe of your installation, and after implementing these things, you will start to build the floors of the units. Machine method. Of course, it is better to do the plumbing of the gar before the electrical and water supply installations. Of course, if it is in use because it is an iron pipe, it is better to do it first so that there is no more pressure on the utility pipes and damage. After this, you are ready to tile the body of the bathroom in the kitchen, and then you can do the ceramic work on the floor of the unit, and then the electrician will come and do the electrical wiring, and then he will work on the lighting, of course, before the ceramic work of the units. You should run the stairs so that you have a place to play with the slope and height of your stairs, and then you can understand the final level of the finished floor of the units more easily. Leave the installation of the windows as the last step because there is nothing that will harm other things because it comes ready and is screwed into the form.
This post is written by Mr_Reza_iranii