Instructions on how to measure or calculate the area of apartments in bachelor’s degree
Introduction:
In order to create uniformity in the method of surveying the map by the experts, visit and control the map, as well as the absence of contradiction between the regions and the surveying office, which is done by the division offices after the issuance of the thesis.
Therefore, the following instructions are issued. It is obvious that the survey method provided should be applied only to new requests. Buildings that have recently received a building permit and are applying for amendments should be done as much as possible to avoid creating contradictions with the former surveying method of the area.
Definitions:
Ownership in different apartments and places of work and residence in a building consists of two parts:
1- Ownership of exclusive parts or assumptions
2- Ownership of common parts or commons
1⃣ dedicated parts or assumptions:
• Parts of the building are considered private, which are customarily allocated for the exclusive use of the owner.
• Residential apartment, commercial apartment, commercial mezzanine (balcony), residential mezzanine (balcony), office, closed balcony, open balcony (roofed terrace in new areas), private parking, private storage, etc.
In the floors, the useful space enclosed between the walls is the measure of area.
The wall that separates the building from Mafrauz with the commons is considered part of Mafrauz building.
The dividing wall between private parts is common between those parts provided that it is not part of the building frame.
In the pilot parking lots that do not have walls, for the parking lots located under the balcony, the space occupied by the parking lot includes a rectangle with a minimum width of 2.5 and a maximum of 3 meters and a length of 5 meters, which is divided according to the width of the opening according to the map.
In the upper floors, there is no indoor covered balcony, and all the indoor covered balconies are calculated except for the subfloor of the floor.
And open roofed spaces (one to three open sides) are called roofed terraces and will replace indoor open balconies. Only the open and closed balconies of the passage are entered in the table of occurrences for each unit separately.
The cut-off seam is calculated as part of the net infrastructure of the residential or commercial unit or any other use that is adjacent to it.
At the time of announcing the net residential or commercial area, the common ducts between the units on each floor are deducted from the net residential or commercial area.
#How_the_space_of_the_apartment
http://T.me/eatlaatekarshnaci