Joybar station updated with modern American technology:
1. Instead of the electronic board, the PLC industrial part is used as the controller, which is much more accurate
2. Using the display makes it easier to access the parameters
3. Using high precision pt100 temperature sensor
4. Using two high and low temperature sensors
that the top and bottom temperatures of the device are exactly the same and the losses are very low.
5. The use of three elements with three separate commands that greatly reduces temperature changes
6. Spraying humidity at the same temperature as the environment, which reduces the temperature doubt of the sperm
7. Using two ventilation valves with a very precise program to supply oxygen
8. The use of industrial parts instead of electronic parts, which makes the probability of failure of working parts very low
9. Equipped with a telephone system when there is an error or power outage
10. All device parameters can be set by the user
11. The device was completely removed from the chassis
12. Using an electric jack instead of a pneumatic jack in the rock movement, we can place the rock at any point at any time according to the plan.
The device has been tested twice and has a very high percentage.
This post is written by R_y5931