You can adjust the temperature for hatching from ostriches from 36 to 37 and it works, but what experience has shown is that 37 will advance the hatch by 1-2 days because the embryo will hatch more and you must lower the humidity to 10-11. Evaporate and don’t be a lazy chicken at any time. At the time of egg transfer, no matter how high the temperature is, you should increase the temperature by 2 tenths, the chick inside the egg will try to tear the air bag and pierce the egg shell. However, in my opinion, from 5 days before hatching, 42 days, you should add 5 degrees to the humidity so that the egg shell is slightly It will be softer and the chicken will not lose its physical strength due to breaking the egg. For the last 5 days, the humidity will not cause any problems until the 17th. Of course, because the humidity is different in every city, friends who work professionally weigh the eggs in one session, and in this way, they have a better and more accurate hatch. Eggs with a high weight are placed on a floor that has less moisture. But I don’t recommend you to weigh yourself because you have to open the machine door a lot and weigh one egg from the top of the machine and one egg from the bottom of the machine every 3 days and remember the weight that has been lost and add and divide by 42 until you get it in the area you want. What relationship should you consider with the device you have? During the incubation period, the total weight of the egg should not decrease more than the total weight of the egg in order to have the best and healthiest production. If we assume that the egg is 1500 grams in 24 hours He should deduct 5 to 6 grams until he has lost about 230 grams by the end of the period. Of course, only friends do this process for a period. However, in hatching ostriches, the higher the temperature, the lower the humidity in the machine. But in my opinion, the best temperature for setter period is 36.5, and of course, the most important thing is that the door of the device is not open and you do not have temperature fluctuations inside the room and the device, so that even the weakest sperms do not suffer from temperature shock. You must calibrate the temperature in the device. Because even the 10th degree is important and the fresh air intake of the machine. Then start the period with 5.36 and with average humidity of 12. Go to the temperature of the device and add two tenths, but consider the period of humidity as 17. With this formula, you will hatch on time and have healthier chickens. If you don’t have temperature fluctuations, the embryo can be linked as soon as possible. Good luck
